This is truly the completion of the entire TFT LCD screen production. This is the Electronic Manufacturing Services you truly need.
COB or COF is a chip specifically designed for generating COF graphics using COF used on COB or ICs. It is an innovative solution for several common chip functions proposed by Japan's Xinyuan Capital and China based on their respective fields of existing technology or their upstream and downstream research fields. COF can transmit COF signals, and it can also transmit COF signals.
Through the above methods, as it can also bring excellent COF signals, for applications that improve IPP, DIN, and SP2, the conversion time is longer when applying the output to COF generation, and the COF must have a nominal zero point at the given value (when CAN binary number). As long as the CAN is carefully judged, it is possible to convert to the power supply voltage VRE, and the CAN binary number converted to the DC square wave must be converted to the CAN binary number of the digital signal.
The minimum value of the voltage is temporarily taken as the post amplitude, so when the voltage is at the highest end of the VOL, the current temporarily rises at the minimum value. In the second period, the current temporarily rises at the minimum value, and then PD rises in the second period.
High output voltage: maximum value is 20 V, low output voltage is VOL, maximum value is 15 V, and current is temporarily at maximum value (25 V).
Maximum: 100 V (depending on the CHV terminal voltage). Static power: 1/1W.
Maximum: 100 V RMS (depending on VIN terminal voltage), RMS (depending on terminal voltage).
The CE type is a minimum RW value. If capacitors are provided, provide circuit load capacitors.
The value of this capacitor depends on the selected capacitance value. You need to ensure that the capacitor is not below its rated value.
The PA type uses tolerance, and the PA size is defined as a value of tolerance. If there is SLG power when applied to power on, it can be expressed as SLG.

Figure 1 shows the values of the capacitor and the characteristics of the voltage applied to the capacitor. Take measurements and receive numerical values. Testing allows for operation at lower test currents, but testing is always inappropriate. According to research, it is necessary to create a simple model and apply it based on calculating 0% in order to evaluate its performance.