Tachbana is the Japanese agent of Topson. The pcb control board industry has entered a new golden age. In 2016, Topson Group was looking for the most representative Japan in Jiangxi to export toys and other products through components.
When it comes to through-hole plug-in electronic products, it is necessary to mention such products as through-hole plug-in electronic products. There are two general wiring methods for PCB: matrix wiring, substrate or high-speed circuit board, and direct wiring. After matrix wiring, different circuit boards can be connected freely to achieve the required network connection, which greatly reduces the overall number of printed circuit boards and reduces the manufacturing cost of circuit boards.
The second is mechanical vibration. In order to avoid the impact voltage of the resonator, the PCB should apply a bias voltage (+- 25%~+30%) on the OCL of the PCB to reduce the ringing and enhance its automatic reset function.
If your PCB has resonance, you may need to see PCB area, compression, electrolyte and adhesive capacity, etc. These options may tighten the design and manufacturing process and use weight and other sensitive things for automatic control, but more complex applications may also face the reduction of PCB area.
Please note that you may have the right to use multiple PCB assemblies, but you should not enter the PCB surface to protect the circuit. Limit the circuit and circuit connection by proper operation.
When measuring humidity, you must use the operating range set by the switch, and you may connect the transistor used to the slot on the PCB to help the circuit connection.
The use of LDR is a low-cost entry point. Understand the need to check this to ensure that all types will not fail. This is the technical parameter of SG-PCB fast repair line and the percentage of copper wire repaired on the circuit board! If the function of collecting resistance is not passed, these expensive copies will be deleted! In addition, a detachable terminal is also needed, which can easily repair the parts that are not repairable, and has the risk of embedding static electricity.
This type of product is usually used for the metal connecting wire required for design. The connecting line may not be connected and the space is limited; Some connecting wires may not be connected, and the metal connecting wires required by the design can be easily connected.
Compared with the traditional design, its performance is far better than copper connecting wire and copper connecting wire. It is suitable for connecting wires with high current, high resistance and potential risks; Comply with AEC-Q200; The degree of hot plugging is higher than that of cable connection; Dynamic hot sale; Reliable overload protection; Simple "contact" protection; Electrical transient protection; Safety optical system of vehicle; Vehicles are popular in industries with high prices; Durability of military industry; Meet the requirements of AEC-Q200 standard; The highest hot sales; Super long connection life.
Plug-in hot plug: three-hole stamping, plug-in thermal protection, electrical connection, durable. Special configuration, durable and scientific sealing.
The head and tail pipelines are durable, highly reliable and durable. They are a kind of durable and highly reliable special formula application.
Applicable temperature sensor: temperature sensor () refers to the temperature sensor that can be transmitted by frequency, transmitted by signal, and based on input.
For UAV, automobile, aviation, information and family aviation, aircraft, power supply, safety and other related.
Automobile, digital electronic appliances, home automation and industry, personal parts, home automation and small machinery,
What kind of signal is used for the thermistor of temperature sensor_ Guide for selection of capacitance and resistance.

Shenzhen Schindler Electronics has launched a new RF power amplifier - RS-06G2T101WS. The device has ultra-low frequency gain, small noise volume, low power consumption, high frequency resolution, stable performance, and high gain. Its rated power is only the sum of the secondary products before mass production.
Reactive power amplifier - "PC104", with small size, small difference in thermal power consumption, low power consumption in reactive current input and amplifier, and maximum power consumption of 100W.
● H - ± 25 ° C, power supply up to ± 12 ° C, overload capacity characteristics: input and output terminals can be configured with external power amplifier (25~28 ° C).
Note 1: configuration mode, boost circuit diagram, capacitor writing, amplifier and isolation 2, multiple frequency input capability, external power amplifier, etc.

Equipment type: TTL-H1, RS-CH1 bipolar FTHA, positive feedback (EDS) LINEAR F4 compensation circuit: TTL-H1, RS-CH2, EDS1 TTL 10 inverter Tx 50 LX6 magnetic retention relay output: TX1, RS-CH2, Vin1 Tx 100 A.
TW3/TW3 single-mode analog signal processing circuit is integrated with frequency divider, sensor and auxiliary circuit.
● Large output amplitude and small distortion; The circuit is complex, and the whole circuit board is replaced under special circumstances.
● Boost voltage: (5) 100% R 01 1K ± 05% resistance; (6) For high-power use, you can choose 1/4 - 1 battery for power supply or 15 alkaline batteries for power supply.