Such manufacturers can support sufficient technology and after-sales service. rigid-flex board technical service contract. Flexible is a rigid board production and sales company that will immediately open.
rigid-flex board is a metal plate with highly nonlinear dielectric function. Under the conditions of thickness tangent and dielectric material price, its forming shape, size, and shape have further changes, and it is applied to automobiles (such as engine heads with complex carrier heads).

rigid-flex boards are currently mainly used in the aerospace field, including rigid and flexible plates for aviation and medical purposes. As the control mechanism for its weight, the control of rigid and flexible plate materials in this regard mainly involves widely forming buried joints through buried guide grooves and blind holes. In order to control the mechanical strength of the adhesive on the product, it is necessary to optimize the thickness and rigidity of the substrate as much as possible, while also minimizing the size of the components.
The flexible printing of flexible boards can be based on these reasons, and the construction of flexible boards also provides improvements. When design or assembly personnel possess flexible design, they need to assemble according to specific needs, and flexible manufacturing is the key to saving production costs.
The focus of productization is on high-density assembly, which has a larger volume and allows larger components to be bent. In the assembly of flexible boards, sometimes both soft and hard boards must be used. Some characteristics of flexible boards are that they can be bent, and using soft and hard board materials can design more products. Large or micro small parts can be designed for micro electronic products, but assembly and maintenance costs and limited space factors need to be considered. Soft and hard boards, such as connectors, integrated circuit chips, and interconnect chips, must also consider the reliability of the connectors or the entire product. The precision of these types of soft boards, hard boards, and main functional soft boards also varies. Therefore, we have all developed interconnecting functions for components to effectively ensure the functionality of the soft board and its connection with amorphous circuits.

Most metals have a small moisture diffusion coefficient (>100%) between them and FR, copper (3oz) is thick, and there is a small difference in purity.
Except for the electrolyte free leaching of copper, the copper coating remains stable within the temperature range of 0-95 ° C. Under the condition of maintaining copper etching force, the gold layer is protected from damage by a gold layer.
At present, the surface of the product is piezoresistive due to the conductivity of the electrolyte and copper. Based on this characteristic, the zinc inside and outside is not rough or aesthetically pleasing.
For those with an outer diameter of 15mm or less, an inner conductor of 100 palma or 100 palma is first attached to the metal layer at the BGA foot, and then the etched fillet is located on its side with a thickness of approximately 04 mm.
If the outer line width and spacing are different, the inner conductor of the coating can be used φ Etching of 0402 or 0603. Only a portion of the line width matches φ When the line width is 13 CM, in order to ensure production efficiency, it is necessary to increase the electroplating layer within the line width with a spacing of less than 10 millimeters, the line width with a spacing of less than 025 millimeters, and the spacing.