Ensure smooth production. The SMT mounting machine is a must-have for every factory in the electronic manufacturing industry and a minefield to avoid in the Electronic Manufacturing Services industry. The production of SMT mounting machines requires production equipment for electronic circuits and high-precision production components.

The production of SMT mounting machines requires production equipment for electronic circuit production components and high-precision production components.
The automatic placement machine is very important throughout the entire process of PCBA, assembly, or other aspects.
The work that SMT mounting machines need to perform is because the operator must be proficient in operating both the "SMT mounting machine" and the "SMT mounting machine" equipment.
The entire process is about the production process of SMT SMT and manual SMT production. This series involves the assembly of SMT mounting machines.
The process involves producing PCB boards in the factory after wave soldering. After completing the wave soldering, the circuit board that has been used must be removed.
In addition, in the reflow welder production line, according to different products, the reflow soldering welding equipment has different functions, so what should we do when using the reflow welder? Here we will tell you. If the reflow welder is used correctly, this operation is also simplified. Let's take a look at the correct guess of the common problems of the reflow welder and how to solve this problem.
When passing reflow soldering soldering, dust will be generated inside the reflow soldering soldering equipment, which will cause the circuit board to be affected with moisture, while the wave soldering board will encounter many solder joints that are easy to mold and discolor, which are easy to mold during reflow soldering.
The soldering cylinder of wave soldering has a large amount of lubricating oil adhered to it, causing severe gear wear, resulting in poor walking and easy blackening.
Solder paste printing test shall be carried out on the circuit board after wave soldering sequence to ensure the printing quality of solder paste, and reflow soldering cannot be simply carried out.
The manual cleaning and tin dipping time is up to 1 hour, and the printing ink in the printing workshop is baked under high temperature to make solder paste reflow soldering.
After the completion of reflow soldering processing, it needs to be cooled again and wait for the printing to be completed within 24 hours. The curing time is only related to the current temperature rise time and ambient temperature to maximize the printing quality.
Because the preheating time of the reflow welder before soldering is very long, the current mainstream in the market is 50W/220V/50HZ power supply, while the reflow soldering welding control is to use the two-stage heating program, the first section is for temperature rise, and the second section is for automatic temperature rise. When the temperature reaches the set value, the machine automatically stops heating, generally set at 15~25 ° C, and uses the automatic temperature rise principle to achieve automatic temperature rise.
The reflux furnace is mainly used for the production and sales of new energy vehicles/new energy vehicle production and sales, basic magnetic components of electronic transformers, power components and other primary components. This oven can be used for drying, insulation, wire insulation, pulse transformer, and transformer of P4, P5, P8 iron new transformers, ring transformers, speaker transformers, motors, and other coils.