After SMT solder paste printing and reflow soldering soldering, the circuit board inspection after wave soldering can detect both sides of PCB. Who can do the PCB component inspection report? Short circuit defect of solder joint after SMT chip processing reflow soldering SMT processing? How to clean the DIP plug-in after processing reflow soldering, check the PCBA processing of solder joint short circuit defects after conventional reflow soldering SMT chip processing, reject the door, check the root cause of SMT chip processing errors and missing components PCB, and check the DIP processing rework? PCB assembly and processing solder joint short circuit defect detection, PCB assembly and processing solder joint short circuit defect SMT processing adhesive defect detection, PCB assembly and processing error and leakage component detection, chip welding problem analysis automatic plug-in processing tin point stuck point detection, bottle sticker 08 lead-free soldering iron solder joint detection report, and disk MARK0201 component size table.
The energy-saving report released by the PCB factory cannot underestimate the printing cost and PCB circuit board cost savings!
Our company often sends manual electronic processing factories to customize SMT chip processing for everyone. In response to product needs, our company has launched lead-free and environmentally friendly lead-free chip processing. For SMT chip processing, we provide certification for all products listed on the market, only used in the Apple supply chain channel. In the later stage, due to market environment, product demand, and the company's short-term variety and other issues, we will help you solve problems and provide assistance in the assembly, testing, packaging and other aspects of the entire machine from bare PCB boards.
All employees of Shenzhen Huaqiang Electronics, through the joint efforts of all employees, completed the confirmation of the delivery time and demand for components for circuit board (PCB) manufacturers in the second quarter of 2022. Huaqiang Electronics Group will carry a series of fast and high-quality supporting solutions, including the highest standard deposit, minimum delivery standard, deposit, and paste function testing, to enhance the high-quality, high pass through rate, and long service life of PCBs.

The total global distribution in the second quarter of 2022 will reach $61 billion, an increase of 249% compared to the same period in 2021. And the total global distribution in the second quarter of 2020 will increase by 12% compared to the previous year.
Download PCB design materials, collect and organize design materials for selection reference, and register them to ensure the success rate of the design.
The delivery of IC carrier board (MCPCB) equipment, EMI electromagnetic compatibility testing equipment, safety testing systems, etc. strictly follows IPC standards.

Electromagnetic compatibility testing and anti-interference testing of MPC/MPT LAB series electronic products. Used to test and test the anti-interference ability of components and subsystems. It has a variety of test items, such as electromagnetic compatibility, dielectric constant (DF) and electrostatic discharge test of circuit board (PCB).
Pilot/maximum 10m, with a 5V power supply added to the 1m long test cable feed circuit or conductor, all resistors can be tested.
Try to apply the current vector and/or ignore it on the testing fixture to achieve fast/accurate testing and other purposes.
● Frequency characteristic: The frequency characteristic during the measurement period cannot be determined, but the time should be determined. The frequency characteristics can seriously affect the test results.
● Combined impedance: coupling occurs between two lines with low impedance at the high amplitude voltage terminal, which couples the frequency signal.