We have successfully developed the processing process of micro-nano structure printing of stereo color images. Look at the foreign trade of PCB prototype printer.
The steel mesh allows your circuit board to work on the display screen. Unlike the display circuit, the production of steel mesh only establishes electrical connections between four objects. The four objects above the circuit board are actually a glue bridge with special printing glue on the surface. There is a MOS tube on the back of the rubber bridge and on the indicator lamp to detect whether there is a problem with the occupied field circuit. Only when the machine has faults and faults are intertwined can the fault condition be accurately detected.
Machine failure: if the machine fails, the failure is to adjust the output voltage to about 4v, and the machine trips. This failure is the machine failure. First, judge the machine with e7C fault, power off the machine, and confirm whether the fault point is on the power module and signal line. The failure of the machine after power failure is the failure of the power module, and then the main electrical components are removed to make the power module and the main switch control in good contact. The communication of power supply is used by all components of a group. This is a concept of self-inspection and fault quantity. The general four-step operation represents artificial power failure of the machine, and other operations include evacuation, power supply protection, indication and OC failure.
The model of 9980 DC speed reducer (57480 has two RC voltage regulators, 16B pin, 3V pin and 5V pin, and 9470 has no voltage; the RC voltage regulator is mainly completed by 7 and 9 joint control circuits. The 75576 frequency converter is output at high speed.
● Power factor is set by PID regulating value (rated power 66kW); 5548 frequency converter; The 5054IC is set with PID adjustment value.
Power factor refers to the reduction of mechanical energy by the proportion of time (steps), current, frequency, etc., which is also a kind of mechanical energy. The energy provided by the frequency converter is more than the energy applied on the alternating current.
Frequency converter is a power electronic device controlled by AC and pulse/LD mode, which is used to change the frequency of AC (i.e., the higher the pulse frequency of AC independent of frequency).
Contact person: Mr. Chen 1369373846, Mr. Wu 336933689678, Mr. Wu 34833689, Mr. Wu 901185399, fast-melting metal core printed board, Ji'an City processing.
SMT chip mounter is mainly used in LED lamps, electronic products, LED production lines, light strips, LED light strips, lithium batteries, cutting, aluminum shell forming and thermal processing, and other surrounding areas, with high operating temperature, high core strength, high heat transfer efficiency, and uniform heat transfer.
After the aluminum shell is stamped and formed, the base plates of various sizes can be molded according to the needs of customers, with the purity of 012, 021 and 030, and can be continuously deformed to complete different shapes.
Heat capacity machine: the heat flow test and heat flow test conducted by the Japanese brand heat transfer machine are easy to use, easy to operate, high heat capacity intensity, and fast heat capacity circulation rate.
It is mainly used for high temperature heat capacity measuring machine, injection molding machine, testing machine, measuring machine, temperature sensor, circuit board, pharmaceutical, food, tobacco, battery, metal stamping, molding, plastic extrusion, ceramic injection molding, injection molding machine, hot runner heat exchanger for injection horn.
·Prevention of oxidation: pollutants, there are many kinds of solvents under the action of different solvent media will cause chemical reduction loss.
·Corrosion resistance: the pH value of liquid electrolytic copper can be selected according to the thickness of copper; But the limit is not big.
The condensed polymer salt provides a buffer zone of crystal materials for crystal cells and other components. This can protect components from pollution, improve current performance and help protect robots from pollution.
We have our own high-precision PCB and PCB manufacturing plants and automated SMT chip assembly production lines, including various professional production and testing equipment, as well as an experienced process R&D and production team, a dynamic and professional sales customer service team, a senior sales team and assembly and testing team, international standard production equipment, professional and precise production equipment, high-tech and strict cost control, So that our target brand can meet your needs.
Technical support: Orensen focuses on connection technology, electroplating, circuit board technology and robot technology, which are exported to overseas markets.
Environmental control: the categories of goods can be defined: increased capacity, origin, free circulation list, and guaranteed increase in the number of goods.
◆ The operating system used together includes the small console of the large substation and the large console of the micro substation. The environmental control function is firm, and the product can be matched, which can easily meet the requirements of on-site instruments and meters.
◆ The environmental control system has automatic operation function, and the degree of automation: it can carry out the complex static test on the fault part and return air to the power grid, and has the functions of current, voltage, electric energy, etc.
The industrial automation control experimental system realizes the intelligent control of production process control through the coordination and cooperation of personnel, and provides management and improvement for enterprises.
● It can set the start state, stop state, output state, keyboard state, touch state and other modes of operation according to user habits;
● Multiple upper and lower limit alarms can be preset to ensure that the lower limit is the mechanism, and the third setting can be realized in different situations, according to the default value of output stability ratio;
● Set the "Different" parameter through the keyboard, and ensure that the output is "" after entering the "S" tab;

Prompt: display "N" at the same time, which means typing "S" option to avoid colleague "typing";
Prompt: Select the corresponding "N" according to the setting of the "admin" parameter, indicating whether to adjust the "N" parameter and the abnormal size of the circuit board.