Safety precautions for the use of micro stress circuit board splitting machine equipment, and with the development of automation technology, precautions for the delivery process of rigid-flex boards. Safety precautions for the use of micro stress circuit board splitting machines: Safety precautions for offline machines: Safety precautions for micro stress circuit board splitting machines: The correct operation of micro stress circuit board splitting machines should choose a safe splitting machine product, which is an important mechanism to ensure product quality. So what are the main precautions? Next, let's have a good chat and observe together.
The contact pressure regulating valve adopts the non magnetic principle, which can easily cause changes in electrical pressure during pressure regulation, improving the accuracy of pressure. It uses automatic electronic control devices or automatic electronic valves to malfunction.
The input of the regulating valve controls that the regulating valve is in a pressure regulating state, ensuring the accuracy and quality of pressure regulation.
Please maintain an input pressure of -7 bar, 4-20mA force output, and automatically balance the locking pressure to ensure low pressure input.
The starting valve, pressure, and motor with operation ensure a voltage regulation accuracy of ± 01~02mm.

● Stepless speed regulation, forced or automatic stall. Strictly control the voltage within the range of 98% and choose between 100%.
The thickness requirements for control boxes, screens, boxes, cars, and unpainted parts (scraping plate) should be measured and analyzed before testing. Under the premise of an ambient temperature of 25 ± 2 ° C, if the ambient temperature is (25 ± 2 ° C), drying treatment should be carried out according to the instructions for use. For car seats or car barriers with lower protection levels, it is best to seal them. Because cars are also very stuffy and cold in rainy and foggy days, if air conditioning is used to cool down, it may be because the air conditioning may be directly immersed in water when the air temperature is high.