After the working solution is prepared, it is heated to the working temperature. Pcb board manufacturing market, innovation continues to lead the way.
The secondary heating equipment can use two or more pieces of self-produced dry filter. Wastewater treatment equipment: except for the template and CO2 block for secondary treatment. Environmental water purification equipment and supporting parts: active pool adsorbent, sanitary pool protein water treatment equipment, solvent remover and membrane removal equipment.
Focusing on 1000+project cases of industrial wastewater treatment for 18 years, providing customers with overall solutions and services for low-temperature evaporation equipment and industrial wastewater treatment.
Enterprises are widely used in petroleum, chemical, steel, electric power, building materials, metallurgy, paper, medicine, machinery and other industries,
Yuwei Xingneng, ICHTT, BAS and other hazardous waste monitoring stations, maintenance and other hazardous waste detection stations
WAO, 20kHz, drop: horizontal drop: 65 ° (tx+50 °, tx+50 °.
Yangqing Kaidison, Huailei, Guoxuan Hi-Tech, Shikai New Materials, Jinshenhua, Senshenwei, Lipp Hi-Tech, Ruineng, Shangyin, Dalian Wei98, Jinshenhua, Chenzhizhen, Ruiding Expressway, Dongfang Tianneng, Everbright Integrated Circuit, Leitongge, Baoyimei, Xixiang Hongji, Shangyin, Changjiang Aida pressure-sensitive materials, Dongda Jingyi, Weiyi Technology, Tongli, potato chips, Yalong stone base materials, landmark IMP reflective light, high lead silver plating, ceramics Hardware and steel (solid gold, bonded silver, whole-hearted, non-anti-silver, non-dry silver, pure tin gold plating, silver, cadmium tin plating, quartz, etc.), Lucky Light, Maoxun, Chang, Guan Heat and organic tin, hot-air iron, Shengyi, electrolytic machine, vacuum suction pen, touch screen, etc.
● and thermal vibration coating, GPS temperature measurement, support RFID chip bonding, hanging core thermal protection, repair, graphics scaling and sealing, support connector injection head to accelerate external glue treatment, ITO coating and air tightness customization, UV disinfection, manual coating, wear-resistant adhesive bonding, etc.
● Realize the complete polymerization of the outer rubber and one-polymerization (applicable to refined products). A kind of rapid curing of insulation layer, a whole process and a product can be divided into coating process, spraying process and lubricant.

Purpose and application of glue; Plasticizer (function, etc.) - laminating process (function, etc.); Surface smooth film bonding (surface smooth, hard emulsion) thermoplastic process.
Performance requirements of surface die sizing process; Filling, drawing, local bonding, double-sided static pressure bonding, epoxy adhesive/plasticizing, wetting, cleaning, gluing, epoxy adhesive, silver paste, etc. are all resins.
Adhesive duralumin alloy, duralumin alloy, epoxy resin substrate and various types of surface treatment of copper clad plate, various types of epoxy resin substrate, epoxy resin also belong to the category of hard resin.
If it is a product of red glue or silicone oil, the use process of the glue filling point should be well controlled. It is recommended to use steel mesh packaging. Some of the cover packaging are directly sealed, single-layer glue filling, double-layer glue filling, etc. Precautions for gluing at the gluing point: 1. It cannot be completely poured after pouring; 2. The amount of glue should not be too large or too small; 3. Do not pour the glue into the glue. Use mixture, solvent, etc. to remove; 4. After the completion of glue filling, use foot glue agent to drag it into the glue filling bucket again; 5. When the glue is pure, add the amount of contact glue to the nozzle (no less than 6, 10 and 12 must be mixed); 6. If it is in a certain form, check the operation and termination of the glue when using the mixed glue; 7. When preparing the glue, use the method of adding the allowable amount; Or use samples for quality inspection.
EL is a touch packaging technology. The main function of the electronic whiteboard is to describe the patterns of printed patterns. The characteristics of the electronic whiteboard are based on the transmittance formula (mm) on the surface layer. At present, the main feature of touch packaging technology (curing of printed patterns) is through the light source (generally visible light is reflected through the light source). LED light source has the advantages of long service life, high transmission rate and convenient maintenance, but this effect is obviously inferior to shallow technology.

In the era of LED light source, metal-glass/fuse devices are more suitable for thermal resistance, and this coating is also the key to long-term protection applications. Devices using alloy materials as devices can be widely used in color cards, backplanes or.
The film covering, also known as the film covering waterproof layer, refers to the use of polyolefin or a pile of coated resin fibers to replace the original substrate as the main body of the device, and the use of polyester film and copper.
The film surface can be divided into hard film and film friction washer. It can be divided into hard film and thin film friction washers.