Stability: Stable circuit design, using imported materials, the printed circuit board component industry has entered a new cycle. In terms of product technology, the company has passed ISO9001. GJB9001C-2017 and other quality certification systems;
Stability: The product has stable performance and adopts a strict automotive quality management system, covering circuit design and inspection, quality control, and after-sales service.
Long service life: working temperature. 45 ° C~+105 ° C, insulation resistance: ≥ 100M Ω, UL IEC standard,
Wide range of power supply voltage for product D: 4V~50V; 12V~60V; 3V-50V; 50V~80V; 400V-100V; 30V-80V;
High insulation resistance of product C: not less than 1000M Ω; 500VDC low insulation resistance: not less than 2M Ω; High insulation resistance of 500VDC: not less than 100M Ω.
C product can also be designed and designed by users according to their needs without reducing transformer power, in order to achieve maximum stability and safety (certified by CE, UL, ROHS, and REACH directives).
F product allows users to choose different designs and wiring according to their needs without reducing transformer power.

Adopting advanced servo cooling system, it is safe and reliable At a rated current greater than twice, with a voltage drop greater than 15 and compressed air greater than 5.
If a single relay is used, the optional relay position display is used to display and adjust the current contact position.
C is used to indicate the short circuit status and distinguish the fault point. Due to the red pin being the contact on the circuit, a low resistance is necessary, so a protective resistor is required.
S can observe the resistance of the C-string through resistance, as shown in the following figure. Take out the resistance value of R x 2 Ω and express it with the strain ratio of R to C. A strain ratio of 5-1 and R of R8-2 indicate a resistance of 100 k Ω. Under normal operating conditions, if it cannot be displayed, it indicates that the resistance is 510K Ω, in V (° C).
At the specified current value, the relationship between leakage current and resistance is as follows: A, B B, C B, D C D, D E F D.