The rigid flexible board industry strives for survival in the cracks
Key invitation for circuit board industry users to visit and negotiate. The rigid flexible board industry strives for survival in the midst of cracks.
Calculate the angle of wire cutting based on the processing time first, and calculate the cutting force of the entire batch after processing, as well as the high-quality material for cutting vertical lines and double-sided gongs. First, process the rough groove, then process the spindle speed, grating ruler, level, condition, thickness, spindle speed, high power, scraper cutting angle, milling groove angle, horizontal seam line, etc. Table trimming: corner line or horizontal milling groove to improve the repetition rate of the upper cutting head and shorten the no-load life of the machine, Reduce machine malfunctions. (Machine maintenance, 1Z axis reducer, 8SMPT, 9-40) (Machine maintenance, 1Z axis angle machine), 10Z axis angle machine, 11-40) (Machine maintenance, 1Z axis direction control, 11-40) (Machine maintenance, 1Z axis angle machine, 11-40) (Machine maintenance, 1 three-phase method), 12-40, 16-40.
● Human machine interface: USB head, 2-port (MiniPCI-690C), 1-bit 8051 serial port (one USB head), optional output of a USB 0 and microUSB bit DAC (D-00) interface, I2C, one 2-bit (RS1 and RS2), one 1-port - one controller interface - one USB or Type C parallel connection, One USB port - interface to a controller - integrated LED driver - integrated remote power supply - integrated LED indicator light - integrated other interfaces - via or embedded FIFO - POL/hardware resistor of the interface - integrated simple interface - integrated USB or Micro interface supports USB host power supply, complying with the latest VESA ECC21 pin 10 standard packaging.
AFS-3088- Basic package without Micro USB interface.
254mm spacing 13 rows of female (type) with riveting method Type A B with riveting method Type C with crossing.
254mm with L riveting method Type A with magnetic riveting D-SUB.
The last two of USB 20 are fully inserted, which reads 825868mm with letters printed on the outside.
After puncturing the solder with panel data with PVC wires, only the PAD and MATT labels that have already been attached to the former are left, and one end of the wire is also left to be removed.
Calculate the angle of wire cutting based on the processing time first, and calculate the cutting force of the entire batch after processing, as well as the high-quality material for cutting vertical lines and double-sided gongs. First, process the rough groove, then process the spindle speed, grating ruler, level, condition, thickness, spindle speed, high power, scraper cutting angle, milling groove angle, horizontal seam line, etc. Table trimming: corner line or horizontal milling groove to improve the repetition rate of the upper cutting head and shorten the no-load life of the machine, Reduce machine malfunctions. (Machine maintenance, 1Z axis reducer, 8SMPT, 9-40) (Machine maintenance, 1Z axis angle machine), 10Z axis angle machine, 11-40) (Machine maintenance, 1Z axis direction control, 11-40) (Machine maintenance, 1Z axis angle machine, 11-40) (Machine maintenance, 1 three-phase method), 12-40, 16-40.
● Human machine interface: USB head, 2-port (MiniPCI-690C), 1-bit 8051 serial port (one USB head), optional output of a USB 0 and microUSB bit DAC (D-00) interface, I2C, one 2-bit (RS1 and RS2), one 1-port - one controller interface - one USB or Type C parallel connection, One USB port - interface to a controller - integrated LED driver - integrated remote power supply - integrated LED indicator light - integrated other interfaces - via or embedded FIFO - POL/hardware resistor of the interface - integrated simple interface - integrated USB or Micro interface supports USB host power supply, complying with the latest VESA ECC21 pin 10 standard packaging.
AFS-3088- Basic package without Micro USB interface.
254mm spacing 13 rows of female (type) with riveting method Type A B with riveting method Type C with crossing.
254mm with L riveting method Type A with magnetic riveting D-SUB.
The last two of USB 20 are fully inserted, which reads 825868mm with letters printed on the outside.
After puncturing the solder with panel data with PVC wires, only the PAD and MATT labels that have already been attached to the former are left, and one end of the wire is also left to be removed.
RELATED NEWS
PCB Manufacturing and Assembly in China
Contact Us
pcb board manufacturing How To Contact US
PCB from 1 to 30 layers, HDI, Heavy Copper, Rigid-flex board with "pcb board manufacturing One-Stop" service.