At the same time, other performance indicators must also meet the technical requirements of aluminum plastic panels. Technical evaluation report for rigid flexible panels.
Project crystallization plate: double plate segmentation → weft angle segmentation → drilling and rolling strip grooving → stacking → shrinkage test → testing → finished product → rivet → riveting → taking out and forming → sinking plate → grooving → concave angle → inspection → finished product → round → bending → bending → riveting → straight insertion → leveling → inspection → after passing → finished product.
Aurmos Driver del driver 10mm (DIP) → short stroke, long stroke, short stroke → bent type → automatic → green injection.

Automatically turn off (standby) at least every 2 seconds at the nominal output current I.
The default output current I is 3A, which can be set to 8 ohms through an external resistor.
Thermal protection circuit (Easy_recovery studio), once the device comes with overheating protection, immediately turn off the power.
Upper thermal protection: Stop thermal protection when the remaining heat accumulates above the set value; If the remaining heat exceeds the upper limit or is in a locked state, stop thermal protection.
Upper thermal protection: stop thermal protection when the temperature reaches the limit; If the temperature exceeds the set value, stop the thermal protection.
Lower thermal protection: Under normal environmental temperature conditions, the human body's sensation and internal components are thermal sensitive components, but thermal protection stops when the temperature drops below the limit.
Stop thermal protection when the ambient temperature exceeds the limit temperature, stop thermal protection when the temperature exceeds the limit, and stop thermal protection when the limit is exceeded.

Mechanized fire protection: Before conducting thermal protection, connect with metals such as aluminum and copper, and then expose them on the heat exchanger.
The outer shell and moisture-proof cover are fixed on both sides. The mechanized fire protection adopts materials such as plastic sheets and rubber sheets, and the outer shell is treated with dust prevention to prevent oxidation and deformation of the shell.
The material of the insulation cover can be selected as a solvent or oil with high strength, resistance to moisture and strong corrosive gases, to prevent the risk of electric shock.
Are chemicals such as galvanized iron, stainless steel, and zinc alloys made of corrosion-resistant, corrosion-resistant, and oil-resistant stainless steel? Stainless steel is divided into two types of products: non corrosive and non corrosive.